Electrical, LNG, and Power Plant Support Equipment Surplus to GE Vernova
- LOT 1
![site]()
(3) 2013/2014 Model TDSH408L Johnson Controls / York Frick LNG Rotary Screw Compressors, (2) 4,000-HP, (1) 4,500-HP
(3) 2013/2014 Model TDSH408L Johnson Controls / York Frick LNG Rotary Screw Compressors, 700 Maximum PSIG, 3,600 RPM, Complete with (2) Teco Westinghouse 4,000-HP 3PH/60HZ, 3,580 RPM Induction Motor 4160 V, 520 A, York Quantum LX PLC Controls, 66" Vertical Oil Separator, 18" x 18" Water Cooled Oil Cooler, (3) Main Oil Filters (2 On / 1 Standby) Control Oil Pump & Dual, 16" Diameter Suction Flange, 12" Diameter Discharge Flange, 150.0 Maximum Inlet Pressure, 400/600.0 Maximum Outlet Pressure, -76.0° Minimum Inlet Temperature, 200.0° / 250° Maximum Inset Temperature, (1) (2) Teco Westinghouse 4,500-HP 3PH/60HZ, 3,580 RPM Induction Motor, York Quantum LX PLC Controls, 66" Vertical Oil Separator, 18" x 18" Water Cooled Oil Cooler, (3) Main Oil Filters (2 On / 1 Standby) Control Oil Pump & Dual, 16" Diameter Suction Flange, 12" Diameter Discharge Flange, 150.0 Maximum Inlet Pressure, 400/600.0 Maximum Outlet Pressure, -76.0° Minimum Inlet Temperature, 200.0° / 250° Maximum Inset Temperature, A/N's: 600296, 600297, 60334 (Note: Skid Bases Can Be Left Behind Due to Weight) Sale Subject to Seller Confirmation - LOT 100
![site]()
Never Used In Original Shipping Crate - 2016 GE Power & Water 160-GPM Demineralized Water Skid
Never Used In Original Shipping Crate - 2016 GE Power & Water (Water Process Technologies) 160-GPM Demineralized Water Skid, 166 Min, 456 Max GPM Inlet Flow Rate, 35 Min. 45 Max. PSI Pressure, 100 GPM Flow, Complete with PRO-M60-CS/PVC-STAGER Multi-Media Filter, (1) Media Tank, 60 GPM Min, 175 GPM Peak Flow, 175 GPM to 290 GPM Backwash Flow, 290 GPM Drain Size, Sch. 80 PVC, Sch. 80 PVC Piping, Nema 4XFG Fiberglass Enclosure, 2-Coat Epoxy Carbon Steel Tank, CFS-PVDF 7 GPD 15 Gallon Caustic Tank, CFS-PVDF 7GPD, 15 Gal. Chemical Feed System (Antiscalant), PRO E-Cell NA-100DP-50hz-440V Pro E-Cell Combined Reverse Osmosis and EDI module, 105 GPM Design Premeate Flow, 146.5 GPM Feed Flow, 41.3 GPM Concentrate Flow Rate, Winning Bidder Subject to Seller Approval - LOT 101
![site]()
2015 GE Limitamp Control Model CR7160 Motor Control Center
2015 GE Limitamp Control Model CR7160 Motor Control Center, 50 KA Interrupting Rating, Class E2, 3 PH, 50 HZ, 3,300 Volt AC, 60 KV, 1,200 AMP with GE Prolec 3,300Y/1905 Volt 175 Amp Low Voltage, 12,080 High Volt, 50 HZ, 3PH Oil Filled Transformer Complete with GE Multilin 369 Motor Management Relay, Winning Bidder Subject to Seller Approval - LOT 102
![site]()
2015 Stewart & Stevenson LM6000 15kV Arc Res. Switchgear, 13.8 kV Voltage Rating
2015 Stewart & Stevenson LM6000 15kV Arc Res. Switchgear, 13.8 kV Voltage Rating, 3,000 Amp Rating, 60 HZ, Low Frequency Withstand Voltage: 36 kV, Impulse Withstand Voltage 95KVBIL, Internal Arcing SC Current Rating: 63KA, Arcing Duration: 0.5 Sec., Short Circuit Making Current: 164KA Peak, Complete with Eaton VCP-WG Generator Vacuum Circuit Breaker, SEL-751A Feeder Protection Relay, Fluke CLKT Infrared Window, Winning Bidder Subject to Seller Approval - LOT 103
![site]()
2015 Stewart & Stevenson LM6000 15kV Arc Res. Switchgear, 13.8 kV Voltage Rating
2015 Stewart & Stevenson LM6000 15kV Arc Res. Switchgear, 13.8 kV Voltage Rating, 3,000 Amp Rating, 60 HZ, Low Frequency Withstand Voltage: 36 kV, Impulse Withstand Voltage 95KVBIL, Internal Arcing SC Current Rating: 63KA, Arcing Duration: 0.5 Sec., Short Circuit Making Current: 164KA Peak, Complete with Eaton VCP-WG Generator Vacuum Circuit Breaker, SEL-751A Feeder Protection Relay, Fluke CLKT Infrared Window, Winning Bidder Subject to Seller Approval - LOT 200
![site]()
Protection Relay Panel,HV Bus
Protection Relay Panel,HV Bus (PO 411513039) (B392HVbpr-A-20454), Located In Houston, TX Winning Bid Subject to Seller Approval - LOT 201
![site]()
Protection Relay Panel,HV Line
Protection Relay Panel,HV Bus (PO 411513039) (B392HVbpr-A-20454), Located In Houston, TX , Winning Bid Subject to Seller Approval - LOT 202
![site]()
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm, Cartridge Type 87479165-El, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 Usg (16.2 Bar (G), Volume, 235 Psi(G) Design Pressure, 352 Psi(G) (24.3 Bar (G)) Test Pressure (PO 411511489) (Bop-028-2054), Located In Houston, TX , Winning Bid Subject to Seller Approval - LOT 203
![site]()
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm, Cartridge Type 87479165-El, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 Usg (16.2 Bar (G), Volume, 235 Psi(G) Design Pressure, 352 Psi(G) (24.3 Bar (G)) Test Pressure (PO 411511489) (Bop-028-2054), Located In Houston, TX , Winning Bid Subject to Seller Approval - LOT 204
![site]()
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm, Cartridge Type 87479165-El, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 Usg (16.2 Bar (G), Volume, 235 Psi(G) Design Pressure, 352 Psi(G) (24.3 Bar (G)) Test Pressure (PO 411511489) (Bop-028-2054), Located In Houston, TX , Winning Bid Subject to Seller Approval - LOT 205
![site]()
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm, Cartridge Type 87479165-El, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 Usg (16.2 Bar (G), Volume, 235 Psi(G) Design Pressure, 352 Psi(G) (24.3 Bar (G)) Test Pressure (PO 411511489) (Bop-028-2054), Located In Houston, TX , Winning Bid Subject to Seller Approval - LOT 206
![site]()
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm, Cartridge Type 87479165-El, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 Usg (16.2 Bar (G), Volume, 235 Psi(G) Design Pressure, 352 Psi(G) (24.3 Bar (G)) Test Pressure (PO 411511489) (Bop-028-2054), Located In Houston, TX , Winning Bid Subject to Seller Approval - LOT 207
![site]()
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm, Cartridge Type 87479165-El, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 Usg (16.2 Bar (G), Volume, 235 Psi(G) Design Pressure, 352 Psi(G) (24.3 Bar (G)) Test Pressure (PO 411511489) (Bop-028-2054), Located In Houston, TX , Winning Bid Subject to Seller Approval - LOT 208
![site]()
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm, Cartridge Type 87479165-El, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 Usg (16.2 Bar (G), Volume, 235 Psi(G) Design Pressure, 352 Psi(G) (24.3 Bar (G)) Test Pressure (PO 411511489) (Bop-028-2054), Located In Houston, TX , Winning Bid Subject to Seller Approval - LOT 209
![site]()
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm, Cartridge Type 87479165-El, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 Usg (16.2 Bar (G), Volume, 235 Psi(G) Design Pressure, 352 Psi(G) (24.3 Bar (G)) Test Pressure (PO 411511489) (Bop-028-2054), Located In Houston, TX , Winning Bid Subject to Seller Approval - LOT 210
![site]()
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm
John Crane Indufil Type 89405293 Duplex Liquid Filter 60Gpm, Cartridge Type 87479165-El, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 Usg (16.2 Bar (G), Volume, 235 Psi(G) Design Pressure, 352 Psi(G) (24.3 Bar (G)) Test Pressure (PO 411511489) (Bop-028-2054), Located In Houston, TX , Winning Bid Subject to Seller Approval - LOT 211
![site]()
Pre Filter, Duplex, Liquid Fuel,120 Gpm (PO 411512027) (Bop-028B-20454)
Pre Filter, Duplex, Liquid Fuel,120 Gpm (PO 411512027) (Bop-028B-20454) (Located In Houston, TX) , Winning Bid Subject to Seller Approval - LOT 212
![site]()
Automated Block And Bleed Valves, Skid Mounted, Gas Fuel, Iecex (411512449) (Bop-076-20454)
Automated Block And Bleed Valves, Skid Mounted, Gas Fuel, Iecex (411512449) (Bop-076-20454) (Located In Houston, TX) , Winning Bid Subject to Seller Approval - LOT 213
![site]()
Automated Block And Bleed Valves, Skid Mounted, Gas Fuel, Iecex (411512449) (Bop-076-20454)
Automated Block And Bleed Valves, Skid Mounted, Gas Fuel, Iecex (411512449) (Bop-076-20454) (Located In Houston, TX) , Winning Bid Subject to Seller Approval - LOT 214
![site]()
Chnt Transformer, High Voltage POtential, 150Kv, 50Hz
Chnt Transformer, High Voltage Potential, 150Kv, 50Hz (PO 411510944) (Bop-390E-20454) (Located In Houston, TX) , Winning Bid Subject to Seller Approval - LOT 215
![site]()
Chnt Transformer, High Voltage POtential, 225Kv, 50Hz
Chnt Transformer, High Voltage Potential, 150Kv, 50Hz (PO 411510944) (Bop-390E-20454) (Located In Houston, TX) , Winning Bid Subject to Seller Approval - LOT 300
![site]()
GE Grid Solutions GL317D | HIGL317D-550 Live Tank Circuit Breaker, 5000 KV, 4,000-AMP
GE Grid Solutions GL317D | HIGL317D-550 Live Tank Circuit Breaker, 5000 KV, 4,000-AMP, 50KA Rated Short Circuit Breaking Capacity, Complete with Pre-Insertion Resistor, 2PH / Breaks, 50/60 HZ, Class C2 Rated line-charging capacitive switching, Class M2 Mechanical endurance, 2-2,3 Cycles Breaking Time (Contact us for Drawings and Specs) (Subject to Seller Confirmation) Located in Brazil - LOT 301
![site]()
GE Grid Solutions GL317 | HIGL317D-550 Live Tank Circuit Breaker, 5000 KV, 4,000-AMP
GE Grid Solutions GL317 | HIGL317D-550 Live Tank Circuit Breaker, 5000 KV, 4,000-AMP, 50KA Rated Short Circuit Breaking Capacity, Complete with Pre-Insertion Resistor, 2PH / Breaks, 50/60 HZ, Class C2 Rated line-charging capacitive switching, Class M2 Mechanical endurance, 2-2,3 Cycles Breaking Time (Contact us for Drawings and Specs) (Subject to Seller Confirmation) Located in Brazil - LOT 302
![site]()
GE Grid Solutions GL317 | HIGL317D-550 Live Tank Circuit Breaker, 5000 KV, 4,000-AMP
GE Grid Solutions GL317 | HIGL317D-550 Live Tank Circuit Breaker, 5000 KV, 4,000-AMP, 50KA Rated Short Circuit Breaking Capacity, Complete with Pre-Insertion Resistor, 2PH / Breaks, 50/60 HZ, Class C2 Rated line-charging capacitive switching, Class M2 Mechanical endurance, 2-2,3 Cycles Breaking Time (Contact us for Drawings and Specs) (Subject to Seller Confirmation) Located in Brazil - LOT 303
![site]()
GE Grid Solutions GL317 | HIGL317D-550 Live Tank Circuit Breaker, 5000 KV, 4,000-AMP
GE Grid Solutions GL317 | HIGL317D-550 Live Tank Circuit Breaker, 5000 KV, 4,000-AMP, 50KA Rated Short Circuit Breaking Capacity, Complete with Pre-Insertion Resistor, 2PH / Breaks, 50/60 HZ, Class C2 Rated line-charging capacitive switching, Class M2 Mechanical endurance, 2-2,3 Cycles Breaking Time (Contact us for Drawings and Specs) (Subject to Seller Confirmation) Located in Brazil
Essential Information
General Information
- Auction Dates
- Starts: 19 November 2025 at 05:00 GMTEnds: 24 February 2026 at 18:00 GMT
- Site Address
- 300 Garlington Road-GreenvilleSC29615United States
- Viewing Days
- By Appointment OnlyContact us to schedule an appointment
Fees & Payment
- Currency
- USD
- Buyers Premium
- 18% or as specified on individual items
- Payment
General Payment Information
• Payment is due immediately upon receipt of the invoice.
• All payments must be made in the currency stated on the invoice.
Payment Terms
• Company Checks up to $3,000 USD
• Certified Checks over $3,000 USD
• Wire Transfer
• Money orders or cash will not be accepted.
• Credit Cards (3% Processing Fee will be Applied) (Call +1 631-418-8261 for CC Payment)
No payments will be accepted on-site; all payments need to be mailed to our office
Please make checks payable to
Apex Auctions USA
315 Walt Whitman RoadHuntington Station, NY 11746
Suite 207
Goods
- Clearance days
- 26 February 2026 at 13:00 GMT - 20 March 2026 at 20:00 GMTSee special clearance terms for removal
- General Collection Information
Collection
Buyers are fully responsible for the removal of items plus all shipping and rigging charges.
• Due to insurance regulations Apex will not supply a forklift, or other motorized rigging equipment to support loading, packaging, or shipping, unless specifically posted.
• Items are only available to collect once the transferred funds have cleared and a collection appointment has been booked.
• Buyers or third-party movers must present an invoice to the on-site personnel when removing their items.
• Buyers must complete the removal of items within the clearance deadline. Unless otherwise stated, normal removal hours are Monday through Friday, 9 a.m. to 4 p.m. (local time).
• Contact and removal information will be emailed at the time invoices are issued.
Rigger / Machinery Mover
Advanced Rigging & Machinery Movers, LLC
Matthew Hinty
mlhinty@advanced-rigging.com
- Sales Contacts

